When Is It Time To Purchase New Tyres?
At a certain point in time, you need to replace your tyres. But why is it exactly important to do so? Many drivers have time and again asked this question. You should know that tyres play a crucial role in giving you a great driving experience. In such a case, if you drive with worn-out or damaged tyres, you jeopardise your safety. Installing the right tyres Edgware will help you to efficiently drive over the most difficult terrains.
When Do You Need New Tyres?
You need new tyres when your tyres have gone beyond their wear limit. For example, your tread depth may go below a specific level, that is, of 1.6 mm. Your tyres can also be worn when your car has a low tyre pressure. If you find that your tyres are wearing unevenly, then you need to change them.
Uneven tread wear means that the tyre wears differently at distinct points. The reasons for it vary. If only one tyre edge is wearing, it states that your tyres are not moving parallel to the travel direction.
Apart from this, you also need to check out any foreign objects that may cause damage to your tyre’s inner structure. You should also check for irregularities in your Bridgestone Tyres Edgware. They include cracks that may have occurred on them due to puncturing or cutting.
Important Things to Keep in Mind
- Make sure to buy a new tyre as soon as the tread wear reaches near the 1.6mm mark. The new tyre should have the same specifications as the original one.
- When you are storing your tyres, ensure that the place of their storage has a stable temperature. You can also store them in a workshop but it is important to store your tyres properly.
The need for new tyres is always there whether you drive your vehicle frequently or not. The time of their replacement depends upon many factors but the most important of them is age. It is recommended that you replace your tyres after a decade. Its rubber compound becomes hard over time and its material starts to deteriorate and become brittle.
New tyres need a wearing-in period to enhance their safety and performance of new tyres. Ideally, you should attempt the wearing-in the new set of tyres before you start using them frequently. It is because when new tyres are produced, they are vulcanized in order to get into a proper shape. To remove the tyres from the moulds, a lubricant is used. With this lubricant, the tyres are prevented from becoming stuck to the moulds. The layer although not noticeable, is present and it will not go away for a short while.
This layer can function as a barrier between the surface and your tyre. Hence, you need to wear the tyres to eliminate them. This wearing-in period will enable the tyres to achieve the desired performance levels.
Wear-in the New Tyres Rightly
When you install new tyres, the first 150 to 200 miles can be described as the wearing-in period. It is only after this period that these tyres provide you with proper handling and gripping capacities. You should wear-in the new tyres very carefully. Do not drive at high speeds and steer clear from sharp cornering and braking. Also, do not drive in mud and snow. Consider dry roads as your tyre’s best friend. It will keep the surface of these tyres intact.
The wearing-in period is crucial and you should take the measures described above so that the new tyres can adapt themselves and offer you the capacities that you expect.